In most homes, the water coming from the kitchen sink ends up in the rest of the house through a long pipe called the “back-siphon”. However, if you have a large family, that long, vertical pipe can quickly become a nightmare. It can lead to constant blockage and leaks, and with so many people using the same water, it’s also very easy for harmful bacteria and viruses to spread. A more effective solution is a network of smaller pipes called a “poly b system”.

What is a poly b plumbing system?

A poly b plumbing system is a type of network of connected pipes that branches off from one main line. Each branch is much smaller than the main pipe, and there are multiple branches. The most common type of system is a three branch system, where each line branches again to create a total of five lines. This system is called a “3-in-1” system because each line has three outlets – one for each possible direction that water can flow. This is a much more effective way to connect sinks, tubs, and washing machines to the main water line. Plus, it’s far less messy and complex than the standard back-siphon. You can install a 3-in-1 system yourself with the right tools, a little know-how, and some patience!

Why is a 3-in-1 system better than a vertical pipe?

A 3-in-1 system is the ideal setup for a family with lots of kids, a busy household, or a long-term stay in a vacation home. It’s much easier to clean out, and there’s less risk of clogging or leaks. Plus, it’s much easier to expand and add on to your home if you ever decide to. A vertical pipe system is difficult to expand and can be very messy. Plus, the vertical pipes are difficult to clean, and it’s much more difficult to change the direction of flow (i.e. change the outlet).

How does a 3-in-1 system work?

There are four main parts of a 3-in-1 system. The central part of the system is the “wet” or “waste” side, where you put the kitchen sink and bathroom fixtures. The other three parts are the “clean” sides of the system and they are all controlled by a special shutoff valve. The first clean side is called the “kitchen sink side”, and it’s where the kitchen sink faucet is connected to the 3-in-1 system. The second clean side is called the “bathroom side”, and it’s where the bathroom faucets are connected to the 3-in-1 system. The third clean side is called the “laundry side”, and it’s where the washing machine is connected to the 3-in-1 system. The fourth clean side is called the “kitchen side”, and it’s where the kitchen faucet is connected to the 3-in-1 system. Each clean side includes an automatic shutoff valve that controls the flow of water from the clean side to the wet side.

How to install a 3-in-1 system?

To install a 3-in-1 system, you’ll need a sump pump, a shutoff valve, and a booster pump. The sump pump should be located in a low-lying area of your yard, and it should be connected to the main water line. The main water line should lead into a shutoff valve, and the shutoff valve should lead into a booster pump. The booster pump should be connected to the last clean side of the 3-in-1 system. Your garden hose is another essential part of the installation; you’ll need it to thoroughly clean out the pipes. Check with your city or town and find out where you can get a permit to install a 3-in-1 system.

Conclusion

A 3-in-1 system is the ideal setup for a family with lots of kids, a busy household, or a long-term stay in a vacation home. It’s much easier to clean out, and there’s less risk of clogging or leaks. Plus, it’s much easier to expand and add on to your home if you ever decide to.